CAS is reading good no faults and trigger scope is ok , injectors are working siq. but spark is not work while i start the engine . when i test the ignition coil from the ignition test it work fine ! i can't find the problem
it have a built in igniter when i test the ignition from the ignition test it work fine but when i start the engine it don't work .. i think it may be at the trigger setup but the rpm read right values and at run-time values window ( trig. 1 & trig. 2 & sync ) is ok and there is no fault
i have the service manual of the r34 and i found the colors and the pin places didn't match with the wiring of the car
i thinks its diff. between rb25det and rb25det neo
hi .. i need rb25det neo ecu pinout , al i found is for the normal rb25det not rb25det neo , does any one have the ecu pinout for it or can help ... thanks