s munro

Afternoon Dave, here is a screen shot of both triggers from the g4+ I have tested this with my friends g4 in my car and the car runs fine. im started to think there is something wrong with my g4+ help would be greatly appreciated Simon M

Evening Dave, i will be back at the workshop on Monday, so will get that screen shot Thanks

Thanks for the reply Scott. Found the issue. The brand new optical sensor was faulty.. But i now have a second issue. Ive put the cas back together with the 24 tooth wheel with another sensor. When you scope the trigger the Trigger one is showing, but it has an extra spike in between the normal trigger pattern. I tried another cas with a 24 tooth wheel which displayed the same scope pattern...

Afternoon, Just installed a 24 tooth CAS wheel for my rb25det. When i tried scoping the triggers to make sure they were there i only found the 2nd trigger present. I check all the settings which im sure are correct. I unbolted cas from the engine and spun by hand and found the 1st trigger will only appear if you spin it relatively fast (by hand standard). I know the engine is spinning fast enough to start. The engine will start and run with my other cas which is a standard 360 wheel. Any ideas?