Jump to content

LOKDUP

Members
  • Posts

    6
  • Joined

  • Last visited

LOKDUP's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. I'm having trouble finding clear instructions on how to complete the following: Allocating the head light and indicator light symbols to the correct input channels Allocating the fuel level sender to the correct channel and calibrating Allocating the speed sensor to the correct cannel and calibrating None of the links and videos I've found so far have provided clear answers to the above. Can anyone provide some clear (novice level) instructions? If someone's available over the phone to help navigate me through the Race Studio software would be even better. Happy to pay you for your time. I have an event coming up next weekend I'd like to at least get the fuel level and speed reading beforehand. Thanks
  2. LOKDUP

    MXS Strata dash

    Hi Adam, I'm having trouble finding clear instructions on how to complete the following: Allocating the head light and indicator light symbols to the correct input channels Allocating the fuel level sender to the correct channel and calibrating Allocating the speed sensor to the correct cannel and calibrating Are there any links to videos or PDFs you can provide me to help me out? Even if you'd be available over the phone at some point to help navigate me through the Race Studio software would be fantastic! Happy to pay you for your time.
  3. LOKDUP

    MXS Strata dash

    Got it resolved thanks! All it took was to go into device manager and re install the driver. Now working y way trough setting up the various screens. Although I have another couple questions: 1. In regards to wiring in the indicators, high beam, etc. Can these be wired into any pin on the loom and configured in the ECU, or are there specific pins preset for these inputs? 2. Is it an earth signal from indicators, etc. that go to these inputs?
  4. LOKDUP

    MXS Strata dash

    Hi Adam. The videos good, but dash is already connected when they start discussing to set up and features of the software. I can't get to that point. Dash is definitely working as it displays engine parameters. When I plug the USB cable from the laptop to the dash, by computer makes a "ping" as if it recognizes the USB connection. But it does not show as connected in the Race Studio software. Using the software appears easy enough, lots of great videos on it. Just cant figure out how to get it to connect. Any ideas?
  5. LOKDUP

    MXS Strata dash

    Not sure if this is the correct forum to ask this, but there's a wealth of knowledge on here so I'm sure someone can help. I've recently installed a Link AIM dash. MXS Strata 1.2. I start the car, dash displays default screen and engine info. I've installed the Race Studio software on my PC. But how do I get my dash to connect with the Race Studio software so I can configure the dash? I've plugged the USB cable from PC to dash, but does not connect. Probably something very obvious I've missed. Any advice appreciated!
  6. Can anyone help me with a basic wiring diagram fof wiring up my G4+Fury to my 13B? I have wired up a few Microtech ECUs to rotaries and its very simple. Wiring diagrams are pretty basic. Eg green to TPS negetive, brown to coil positive, etc. LINKS are much more advanced and complex. As they can be configured so many ways and are not vehicle specific the wiring info provided is npt specifuc to an engine either. I just need to what wires to use for TPS, CAS, temp sensor, triggers for injectors, fuel pump, etc. Just a basic 13B non turbo rotary. Only need to know tge basics. Can anyone help?
×
×
  • Create New...