pugsparked
-
Posts
42 -
Joined
-
Last visited
-
Days Won
6
Reputation Activity
-
pugsparked got a reaction from Vaughan in PC Link and Firmware 6.20 released
I asked for anti lag logs with 6.21 and 6.22
It seems that with 6.22 it loses the throttle body movement when it activates the ALS.
In the logs if they indicate which E-Throttle table is used, sorry. Only RPM Limit does not differentiate between 1 or 2
-
-
pugsparked reacted to Adamw in Introducing RealDash - A Dashboard App for Android & Windows
I assume you mean 500Kbit/s. You can use any bit rate you like. My example was 250Kbit just because my dyno connection works better at that speed.
-
pugsparked reacted to Confused in engine misfire when Di3 activated
If you are going to continue using the Evo 1-3 Plugin, you will need to go back to Wasted Spark.
It's disconnecting 2 wires (that currently go into IGN3 and IGN4) and combining them with the wires that go into IGN1 and IGN2.
It took me longer to write this post than it'll take you to change the wiring.
-
pugsparked reacted to Simon in No Output on Ignition 4 After Changing Battery
It will need a bottom board revision to resolve this. The bottom board has been unchanged between G4, G4+ and G4x.
It is ear marked to be revised in the future.
-
pugsparked got a reaction from Skeeed3r in G4X and Grayhill CAN Keypad
I can't get it to work without PMU, I tried 2 different ID
-
-
pugsparked got a reaction from TechDave in G4X and Grayhill CAN Keypad
Some news? I used the Toucan file and I have six CAN Di working with some errors.
-
pugsparked reacted to TechDave in [UPDATE] PCLink 5.6.5.3338b Released
That and a few other handy features are already on my list of "Things that would make PCLink much nicer to use as a tablet dash".
Thanks!
-
pugsparked got a reaction from Adturb in [UPDATE] PCLink 5.6.5.3338b Released
Hi, to use the Link software as Dash in the next update you could remove the outer frames of the watches and always be in front.
This way it could be configured similar to a Motec or other Dashboards
The Dial gauge RPM could also be improved with a more "Racing" look
I attach an example
-
pugsparked got a reaction from TechDave in [UPDATE] PCLink 5.6.5.3338b Released
Hi, to use the Link software as Dash in the next update you could remove the outer frames of the watches and always be in front.
This way it could be configured similar to a Motec or other Dashboards
The Dial gauge RPM could also be improved with a more "Racing" look
I attach an example
-
pugsparked got a reaction from Shedley in [UPDATE] PCLink 5.6.5.3338b Released
Hi, to use the Link software as Dash in the next update you could remove the outer frames of the watches and always be in front.
This way it could be configured similar to a Motec or other Dashboards
The Dial gauge RPM could also be improved with a more "Racing" look
I attach an example
-
pugsparked got a reaction from tiago in IAT installation Subaru V5-V6
At standstill with engine running or at low speed the IC is heated by the engine and will have fuel corrections. One option would be the condition of exceeding 30km/h to make corrections.
Regards
-
pugsparked got a reaction from Scott in help setup for 7MGTE stock ignitor
Work correctly with DH61
ALS adjustment
-
pugsparked got a reaction from Scott in gauges android tablet
Why not use a windows table and link software
https://www.youtube.com/watch?v=cXmmUjhMPGc
-
pugsparked got a reaction from TechDave in Link G4+ Tablet view
windows tablet 8,9" Sunstech TAW895QCBTK dual port, USB and
charging