StijnFSP

hi can i use the 1zz triggers for the 2zz ge engine or not ? i have a custumor that wants to put a 2zz engine inanother car and i want to use a link ecu to control it . can i do this ? kind regards found it in the help menu

i think the timing belt is off or something because all 1.8t with med 7.5 ecu are same trigger paterns .

any new on release date ??

Ok thnx will try that

hi , i'm runiing a g4+plugin v7-9 on a rally car but with no oem dash i have the dash 2 pro installed all working fine but i've installed a DCCD controller and it needs rpm signial i wirred the aux 4 directly through the dccd controller without the oem dash but i dont receive any signial is this caused because i dont have the oem dash installed ? because with the speed signial it was that problem . thnx in advance

Worked like a charm thnx

Ok thnx didnt know that thank u verry much !

hi can u guys convert this file easely to a g4+ file ? or do i need to change it myself because its a time consuming thin maybe u guys have a quick solution ? thnx in advance ep3.pcl

no didnt try because of the 12V connected to the ecu but will do this . thnx for the tip

hi , i have a problem with the digital input of the speed sensor of a subaru i tired : other sensor rewirred the 3 wires 12v ground and signial manualy rotating the sensor tried another input on the ecu (di3 di4 and the oem di5 )maybe i made a fault ? i added the file or could there be a fault in the ecu ? thnx already for looking . xavier build motor hatch e85.pclr

its 6 days past that date any news ? need it also for a new laptop

Check the engine coolant temp sensor wirring to make sure the pins are correctly ground and 5v

Ok stupid me overlooked the gain on each cilinder

Will check that on anothet car i tried to set up because on my v3-v4 impreza its working perfect . maybe i uploaded the wrong map will look at it when i have the car. With me i just quickly adjusted a map to upload it sorry if thats the issue i feel realy stupid that i overlooked it

Had the same issue on a ttlink so i also think its a bug

hi i added the file . jochen 1.8t knock.pclr

Hi i cant get knk readings on a tt link+ and tried it on several tt links is there a wirring i need to change ? thnx

It reads fine and also looked at the help file i just want to know if someone else used the knock sensor of thr v3-4

Hi what khz do best use on a ej20 with v3-4 knock sensor and g4+

Ok thnx thats an easy fix

Hi , i wired a dash2pro in and it works but only thing i cant get the ecu online on pc linkwith the dash connected setup is dash2 pro to can1 of a wrx v7-9 setup cansettings as in help When i disconnect the dash pc link gets online right away do i need to use can 2?

yeah i can see the values will note them down and send them

tried that didnt work ,on the base file they arent on also . wired in from di 1 and 2 to sensor to sensor ground

Hi, i retrofitted a my2004 sti engine in a my99 subaru i repinned everything and its running on the V5-V6 link g4+ but the cam control isnt reading the degrees . with the cam test on it reads some degrees but without the test not . but the soleoids are working acording to runtime value . added the cal jurgen piens my99 sti swap.pclr

Hi, i have a wrx link v3-4 and want to wire in a egt sensor i have one from link and a thermocouple but i was reading on the help and i didnt find the right way to wire it in ? i understand that i need an amplyfier can u tell me witch one i need?