Gibbo

Adam i have got this setup working with most success on my vipec i88 wire in and aim dash. The only thing i that dosnt work is the EGT which i have assigned to AN Volt 2... the display on the dash reads nothing at idol then when you accelerate it flashes some numbers like 1000 ect. Maby there is some mismatch in the can config as the ecu itself displays egt prefectly on the computer.

i emailed aim about this and they responded that it is hard programed into RS3 and cannot be displayed. or handed out as a separate document.

Thanks mate it would be much appreciated by us Drift guys and im sure the Rally guys wouldn't mind it also for gravel.

Thanks Scott ill see if i can get some info out of AIM... In the aim setup file there is an option for G4 Rather than GENERIC CAN... this has the ability to use the AN volt Chanel. Is there a way we can configure the G4+ to transmit on these streams.

Gents I need some help with adding some more Channels to My Aim MXL STRADA Dash. There is a lot of information being fed into the ECU and i need to display more on the dash. The Generic dash base can profile has no allowance for things like Exhaust Gas Temps And NOS Pressure which we have setup to an AN Volt Channel. I cannot work out how to do this through the AIM Race Studio OR The Link Software. FYI the dash is working with the channels that are already provided just i would like to add 2 more.

Gents we have setup shift cut with the TTI Sequential Gear Barrel POT. Due to this being a drift car we need to be able to turn the shift cut on and off via a switch in the cab. I have thought about using a switch to turn off the gear barrel AN Volt input but this will turn off the gear display and as this car is fitted with NOS i don't want it spraying in 1st or second gear. I there another way we can do this and if not available is there a way it can be added into the firm where.