Stu UK

Hi All, I have a Link CAN lambda and am having a few issues with it. It worked for a couple of days but stopped. It displays 148.75 for some reason. Tried a new sensor which hasn't helped. Check the wiring today and it looks ok to me. Can't see any breaks and tested CAN wire continuity from ECU to CAN lambda. Resistor appears ok. Power is supplied by a dedicated relay which is working. Lambda sensor would appear to be heating up ok. Log file should be attached. Any help would be much appreciated as its driving me nuts. Thanks Stu Log 2020-07-26 3;42;43 pm.llg

Just stumbled across this thread and it looks like it might workaround the erratic R32 GT-R speed input problem. Did you have any joy with that sensor in the end ? I've seen they do another style of sensor (BR3-HG-2) which looks like it could be used with the R32 GT-R speedo cable driving the dash still. f2f644_464ae56b289f4e6b88e68cd780acb8ab_mv2_d_1512_2016_s_2.webp

I use a dual boot Chuwi Hi8 Air tablet with an OTG adaptor for charging and it also allows the use of a bluetooth dongle for a mini keyboard/trackpad. Good bit of kit for the money. Vid of it being used. https://youtu.be/G4mAl1DLrG0

Yes, I tried the opposite edge but it didn't really make any difference. Must have a log file somewhere. I'll have a look.

Yep, the one you installed for me Mark - blue 32 Its using a wheel speed sensor. I need to check which one.

I have the same eratic speed issue on my R32 GT-R too. Let us know how you get on.

Just wondering if it was feasible to add a feature where you could add a virtual button like you might add a gauge display in PC link and then you could interact with the button to turn things on and off. Would be useful for tablets etc in car.

Looks good. Did the OTG adaptor allow charging and communication at the same time ? Cheers Stu