Ammar Alqisi

Setting on ecu done for transmit, we need to transmit ect, rpm ,iat & map to motec pdm . We are ,missing the can setting on pdm, Both files attached Link.pcl5 TEST PDM Configuration.pdm

@Adamw We need to know the can between Motec PDM and Link G5 Vodoo, i need the pdm to see ECT,RPM,etc... from ecu .

Hi Everyone, 1) Whats the can id for Greyhill ( Motec Keypad ) on Link G5 ? and can use it like the link keypad ? 2) Whats the Can setting for Link G5 using Motec PDM 30 ?

We installed the white seeed studio , but whats the setting on ecu , realdash & white seeed studio interface ?

Antilag activation, high boost activation, i need to activate the Di or CAN DI .

We have a car has 2JZ with G4x and ecumaster PDU, keypad connected on PDU and its working related to PDM, we need to activate the grayhill keypad on ecu, should we connect the keypad directly to ecu ? And whats the CAN ID and rate for keypad ?

https://realdash.net/manuals/supported_can_lin_analyzers.php Which one recommended for Link ECU ?

Is G4x ECUs suporrted RealDash ? or we need can adapter for it ?

Hello, I attached the files for link ecu and pdu setup, all is going well, but we have one question, we need to activate the NOS request from ecu to PDU, setting on ECU done, but how we can make it works on PDU ? Charles racecar.pclr charles sa14.pmu

In can setup, Using Mini R50-R53 the dashboard is working in E46 ( Rpm, Fuel & Temp ), but how we can make the oil and battery lamp working ? whats the can setup for oil & battery lamps ?

We added the ethanol sensor to the ecu and its working on ecu, but cant make it working on dash, dash is AEM CD7 . Any idea whats the parameter we should us ? or there i s a custom setup for it ? Evo Blue Ksa .emcd7.aemcd7

Ok we understand, will connect it to CAN 2, we contacted simon and said adam the only one who will help you, and we appreciate your effort, can you go with us on teamviewr to do the setup ? Everything is ready and connections all done .

Adam, we disconnected the blink marine keypad from PDM, and connected to CAN 1 on ecu, we see the can is working and no error on runtime values, questions is, how we can setup the keys ? like start engine, Antilag , boost ?

Could you please provide us your email, cuz aim sent us a manual for keypad .

@Adamw The one we have 12 Keys, which one we should select ? ID 0X19 , 0X1A ? Baud Rate should be 125 Kbit/Sec ? Should we use any external resistor on keypad ? and last questions, from power output we have always power on keypad ? Check the setting for ignition switch and start engine on my pdm setting . PDM32 Wael.zconfig