Jump to content


  • Content Count

  • Joined

  • Last visited

About BCNR33Zed

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. thanks but that ID2000's data are for 400kpa of base fuel pressure.. I'm searching some for 350kpa of base fuel pressure
  2. I've already saw that table for the Dead Time, but, is only for 8/10/12/14/16 volts. I'm taking the 50psi data, but on the Link configuration there are more values for the battery voltage.. Start from 6Volts to 15Volts. For the Short Pulse I can't find anything also.
  3. Hi, Can someone help me to find some data sheets for my ID2000 or someone has a screenshot of the configuration for those injectors? Thanks
  4. you know what are the options for the GR/GV chassis?
  5. Hi, is avaiable a Link G4+ Pnp for 2014 Impreza STi ?
  6. i've send an email for more infos and prices. i'm waiting for the reply :)
  7. How is possible to wire the DBW system in G4+ for GTR?
  8. There are others motors that I can use for keep the OEM Multiplies Throttle Bodies?
  9. Hi, Is possible to run DBW on a GTRLink? I'll want to run a DBW Setup on ITBs so I'm going to install a BMW M3 E46 DBW Actuator.
  10. BCNR33Zed

    Launch problems

    what do you think about a proper Launch configuration for an R33 gtr high powered?
  11. Hi guys, Can someone help me to configurate the Knock control with the standard R33 GTR Knock sensors?
  12. Yeah, my idea was that. The first map for normal use, with overrun fuel cut activated, the second map for have fun with overrun fuel cut deactivated and 4d fuel table and 4d ign table for modify the areas without load for make some bangs and flames when release the throttle.
  13. Hi guys, Is there any function to activate or deactivate the Overrun Fuel Cut with a Digital Input or a Virtual Aux?
  14. BCNR33Zed

    Launch problems

    Try this. I've modified your Launch control setup without touching the Launch fuel. flandrsMap_FZMod.pclr
  15. I don't know if I have that sensor. i'm configuring speed sources and gear detection for control boost pressure on each gear, launch control, etc..
  • Create New...