Jellytots

Thanks for the feedback Adam , have a few things to check

Hi Car Skyline R33 GTST ECU: Link PNP Car is standard OE , Nismo Thermostat, set to 0.9 bar max Boost PCLR File Attached Question1: Curious as to why the Boost Target Table is set to start for 1 bar to 2 bar , 0-100% Throttle; I was expecting it to start at lower boost than 0.8 and work its way up to 0.8 bar at 100% throttle? Question2: The engine light keeps coming in on WOT (Wide Open Throttle), Will the check Engine light be triggered when knock is detected ? I have 57 counts of Knock Detected in the Status windowIs Error 19 the cause , Analogue Input AN 4 -- Lambda -- Above error High Value Q: Fuel Pressure Car has very high Fuel Consumption , not too sure if the Nismo Thermostat is the culprit because it is lower opening temp,If I install a fuel pressure sensor, is fuel pressure part of the model and will it be compensated for? Nismo Low-Temp Thermostat allows the radiator valve to achieve a lower temperature opening at 62C (Standard = 76.5C) Link G4+ R33GTST Map.pclr