Miura

Thanks Adam, I'll give that a shot.

Like the title says, I'm looking for some good data on stock injector dead times for my 20 Valve 4ag. I recently acquired a new basemap using modeled mode. I feel it's a better jumping off point than the last map I had, but I'm a little dubious about the injector dead times that were entered. Here's the table that's in there now: 6 7 8 9 10 11 12 13 14 15 (V) 3.3 2.7 2.16 1.7 1.35 1.1 0.89 0.75 0.66 0.58 (ms) I had the injectors cleaned and flow tested before putting the engine in the car, but it seems the sheet is missing in the shop somewhere. Hopefully I can find that soon so I can at least have some good data for the injector flow@rated pressure. Right now the engine is running fairly rich, especially during warmup (like 10.5:1 AFRs), but the AFRs are fairly stable too, so I'm thinking with some tweaking I can get it well enough in line before taking the car to the dyno for a more final tune. Also, if nobody has good dead time data for these injectors, does anyone know of a good way to make a test bench or know of someone with a test bench setup for getting good dead time values? Thanks.