Jump to content

Martyjet

Members
  • Content Count

    4
  • Joined

  • Last visited

  1. Thanks for your replies guys!! il put this to my tuner and see what he says. anymore input would be great thanks!!
  2. Also mate, thanks for your reply. im just going off what my tuner is telling me. I'm not a tuner by a long shot. he is saying on start up the car won't start first go because it has a 4 second delay to register what fuel is in the sensor?? when you first start the car it revs then stalls. Then on the second start it will start. is that normal? before when I was running just pure 98 the car would start first kick.
  3. Thanks for your reply mate but that's kinda giving me the same problem is there any way I can set it up so I can start the car without waiting for 4/5 seconds for everything to register? My mate has a thunder and the same flex set up and he does not have the delay
  4. Hi I'm running a g4+ plug in with my jza80 and on start up I'm getting a 4second delay on my flex sensor. It's gm sensor and I also have a gauge taped into the wire from my sensor to the di pin which Is for a brake light switch that isn't used in the factory loom. my tuner is pretty stumped on this issue and I'm a bit concerned that he has not figured it out because it really effects my start up. Any help on the issue would be great thanks. here is a link to the gauge and sensor I'm using. https://www.ebay.com.au/itm/201704992974 https://www.ebay.com.au/itm/201706719227
×
×
  • Create New...