Jump to content

Toona

Members
  • Posts

    8
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Toona reacted to David Ferguson in High idle after rev   
    Have you check the manifold for leaks?   A missing /broken vacuum hose or cap will cause this.   I bet it will keep running even if you completely seal the throttle with your hand over it.
  2. Like
    Toona reacted to Vaughan in Fuel relay fault.   
    Either change the hotside feed to the relay trigger to an ignition switch supply or use a spare Ignition or Injection pin instead of a normal Aux pin to trigger the relay. Aux pins backfeed when fed power while the ECU is off.
  3. Like
    Toona reacted to Adamw in ECU Fault Code 84: Aux9/10 E-Throttle 1 IC Over Temperature / Under Voltage   
    Yeah, looks like a mechanical issue with the motor to me, you can see below the ECU is sending 100% power to the motor trying to make it close, but it is moving very slowly.  The TPS sub and main match so it is not a sensor problem.  

     
  4. Haha
    Toona reacted to iceman_n in ross trigger for rb engine   
    except filtering you should use very good quality screened wire on this kind of sensor
    also Trigger Arming Threshold has major fact on magnetic interference
×
×
  • Create New...