Jump to content

Proximity

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Proximity

  1. We have used the link to control a water meth table before, but not with a standard nozzle and solenoid. We used a Holley 1000CC Water Meth Injector and a Pump. The pump turns on with the ECU at a trigger point - X boost and X RPM. Then a second later, at X boost and X RPM the link sends a PWM signal to a Holley PWM module which controls the injector. The reason we used the Holley module is that the injector runs at 12 amps, and it would fry the ECU. We could not use a SSR in this application (we tried) but the frequency was not fast enough to be progressive. The SSR just "stayed on" when we tried to PWM control it at high speeds
×
×
  • Create New...