Leon

hiya, cheers for the reply, i have tried a new set of plugs, still no go, will charge battery and try that, i have another crank angle sensor so will try that, and also clear the codes, failing that might have to get injectors flow tested but there doesn't seem to be a lot of excess fuel on plugs. again thanks for the help .

13b 2.llg 13b.pclr ok i hope i done this correct but here is base map and crank log, cheers

im not sure what is pluged into there, i will run a log later this arvo when i go into work, it has an error code 46 which is air temp sensor, because i havent fitted it yet, that was there when tuner started it, im yet to finish exhaust so was only starting it to check for leaks etc, the only thing i have done is disconnect the battery, not sure if that can change any thing. cheers

hi all, i have a 13b with a link monsson , had my tuner come down and set triggers ect and get it started, ran fine for a couple of days, went to start it 3 days after and all i get is huge back fires, i have not change a thing, pluged it into my laptop and has an error code of 22, any ideas ?? cheers

yes the injectors are high impedance, cool cheers will plug it in after work and check the settings, thanks for the replys

hi, i have a new link monsson which i had wired to my 13b by my local sparkie, it has spark but no injector pulse on crank, injectors will trigger on test mode, i rang link and because im using a s4 13b i have altered trigger 1 and trigger 2 to suit but still no joy, any ideas would be appreciated , cheers