[No rpm during cranking - Reluctive sensor]

Problem solved,

Since it's my first experience with a link ecu i have overlooked the cam sync pulse..

Thanks for the quick support Adam!

[No rpm during cranking - Reluctive sensor]

Hello ,

My first (and maybe stupid) question on this forum:

I have a engine strapped on the engine dyno from which i struggle to get a starting rpm during cranking.

The concerning setup has a custom trigger setup (60-2 / reluctive / air gap 0.9mm) and is controlled by a Link xtreme ecu (program attached: 3s-gte).

Already tried a few options:

-Triggerscope is getting signal(also attached: Trigger_1)

-Polarity swap of the reluctor sensor.

-Setting arming treshold at different values (included it's minimum value of 0.2)

-Setting different values for filtering

Normally i would swap over to a hall sensor but since the wire loom is already twisted and tucked in raychem this isn't one of my options...

 

Can anyone tell me if i'm missing something?

Trigger_1.llg

3S-GTE.pclr