Jump to content

Fikemoster

Members
  • Content Count

    8
  • Joined

  • Last visited

Everything posted by Fikemoster

  1. Fikemoster

    Rb25 trigger setup

    Hi guys I'm new to the forum but have had my link ecu for quite some time but have been in the process of wiring it in and doing some other bits and pieces to the car. I have a link g4 xtreme silver box and the engine is a rb25 s2. Right the questions. The other day I thought as I'd only like to wire the car once I would take advantage of the features and change over to a trigger setup now. I am going to build my own brackets to house the sensors and make my own trigger wheels etc but what I'd like to know well I'm after opinions on what is recommended. I know there are hall sensors which seem to be quite popular and I have been recommended over on the sau forum by a perticular member to use the Bosch motorsport hall sensor. Looking through the link manuals the wiring seems to be pre wired for a reluctor sensor and I see that on the link website the sensor you sell are reluctor sensors and various information online seemed to rate reluctor sensors as being the better choice but if I'm honest I have no idea. And myself building the brackets and triggers the choice of sensor will effect how I build these so I'd like to get it right first time. So any help will be fantastic Mike
  2. Fikemoster

    Rb25 trigger setup

    Lovely thankyou again for your help Adam
  3. Fikemoster

    Rb25 trigger setup

    Wicked I can now put this project in to progress thanks for all the help. If I may can I ask one last question. On what will be my two trigger wheels the sync wheel on the cam and the ref on the crank. The spec sheet for the bosch sensor doesn't specify the location that the missing toot/teeth will be is this dependant on engine or how is it calculated. As you know I'll be using 36 - 2 on the ref and I was going to use a wheel with a single tooth on the cam/sync. Something like this (attached image) Thanks again sorry for the n00b questions
  4. Fikemoster

    Rb25 trigger setup

    Ok thanks for the very useful information again. You have been a great help. Im pretty much set to go now. Just need to design my brackets. One last question. On the spec sheet for the bosch sensor it gives the dimensions for trigger wheel and size and it specifies a 60 - 2 wheel. I presume the sensor will be ok reading a 36 - 2? Thanks again
  5. Fikemoster

    Rb25 trigger setup

    Hi thanks for the information I think I have narrowed it down to two sensors the other being: http://www.bosch-motorsport.de/en/de/produkte/catalog_products_1_797239.php I'm leaning towards the Bosch sensor now where as before I was abit unsure as it was a three wire and I associated three wires with hall sensors but looking at the spec sheet it appears the third wire is a shield can anybody confirm that? The main reason being it seemed easier to wire in a 2 wire sensor to the link wiring than a 3 wire. I was planning on using either a 24 - 1 or 36 - 2 on the crank and a single tooth on the cam but before I committed I just wanted to make sure as im using a slightly older generation of link ecu (silver box) it could keep up with the higher tooth count Thanks again mike
  6. Fikemoster

    Rb25 trigger setup

    Ok thanks for that information. I was also recommended this sensor: http://www.nzefi.com/product/crankshaft-reluctor-trigger-sensor/ And I have delt with nzefi before and have always been happy but wanted to make sure the sensor would work with my specific plan. I saw a guy use the harmonic balancer (via cutting teeth into it) as the trigger wheel itself. But he was using the honeywell gt sensor Thanks again
×