Search the Community
Showing results for tags '2jzge'.
Found 3 results
So im unable to get the car to run properly on this ecu and any help would be appreciated. we can get the car to start with an updated map sent from xcessive but it is misfiring and I have no clue why. I testing the injectors and they all fire with the test. so if anyone can help that would be awesome. is300 2002.pclr
just bought a link ecu g4+ and was going through start up guide. MY build is 2jzge- turbo Supra JDM 1993 , map sensor calibrated, tps not calibrated (wiring issues). when i crank the engine there is no spark from main coil going to distributor cap. Originally running a piggyback system with the Aristo 2JZGTE ecu which was running fine, unplugged earlier today, current ignition module is rewired to work with distributor because the 2jzGTE uses COP instead of distributor (old setup). In the ignition settings neither direct spark or distributor have any spark. also unsure about what trigger setup to use, when cranking trigger signal status 1 is on/active Was previously running fine before installing new ecu
i am looking for a ecu to run my 1998 lexus gs300 with automatic transmission and has the 2jzge vvt-i fitted. i have turbo'ed this engine using a gt35 turbo and i am going to be forging it and running stage 3 brian crower cams so i need an ecu that will run a 2jz with vvt-i and a auto gearbox if anyone can give any guidance, thank you.