Search the Community
Showing results for tags '3uzfe'.
Found 2 results
Hi all I have my 3uzfe running off the 1uz vvti basemap on my link G4+ xtreme but its running pretty rich at the moment. I'm going to be converting to MAP and wideband before i take it to my tuner, but for now i am just running MAF and narrowband. Is there anything i can do to lean it out abit? I just want to be able to run in up to temperature and make sure everythings okay before i take it to the dyno as its quite a long drive to get there and don't want to have any problems, but its super smokey and rich. I've uploaded my basemap with a log of it running for around 30 seconds. I will be doing MAP conversion and Link can lambda in the next month. Many thanks Rich running map.llg Rich running map 3uz.pclr
Hi all I have a 3uzfe running with a G4+ xtreme. I was originally going to run narrowband lambda and maf (factory setup) just for reliable n/a power until i supercharge later on down the line. I'm going to be taking my car to my tuner in the next month or so and figured i may aswell convert to wideband for easier and better tuning for them. Is it just a case of getting 2 bosch LSU 4.9 wideband sensors, one for each bank. I already have my narrowbands wired up so should just be plug and play with wideband sensors i guess? And are those bosch sensors the ones to go for? Any recommendations? Also, i'm running maf at the moment, would converting to map be a better option for n/a tuning, would it be more accurate? I need to go map in the future for charging, so again, may aswell do it now Thanks