Search the Community
Showing results for tags 'AIM'.
Found 4 results
Hi There, I have the Link MXS Strada dash in my s15 and I am having some dramas with the auto dim feature on the dash. it seems as though the sensor is not picking up much ambient light in the car as it has dark tint and small windows along with the screen shade to limit glare. I have already sett the threshold to 20% however it is dimming the screen when it is much too bright still. Is there a way to facotr the luminoscity sensor's scale? Or will this need to be a firmware thing from AIM? To be honest it used to be fantastic when i first installed it but since the last few firmware updates it has not been as good with the auto dim function. Any thoughts or suggestions would be great Cheers, Trento
I've an AIM Evo 4 that I'm successfully reading CAN bus data from my Link G4+ Xtreme. However Race Studio only allows me to configure the ECU as a Link G4, and will only display a very limited set of parameters. I'm specifically attempting to display my Trans Temperature (AN Temp 4) however Race Studio has no such parameter. The only channel that appears close in Race Studio is "Channel 4" which appears to relate nothing when configured as a G4 and possibly AN Volt 4 when configured as a VIPEC. Any ideas before I attempt to get AIM to release a new version of Race Studio? Cheers, Daniel.
Looking for help G4+ Storm with AIM MXL dashReceived only G4 information not G4+ and it is now quite a differenceDash is sorted but needs the G4+ data set called "Generic"Used to be Called Generic Dash LCC fileG4+ needs a LCS fileCan anybody supply a LCS file for the G4+ please? If yes, please forward to Robbie email@example.com
I've a AIM Evo 4 to which I've wired the CAN high to CAN+, CAN Low to CAN-, and the earth. However I'm not receiving any CAN data to the AIM datalogger. In addition the connection of the CAN cabling appears to drag down the controller (I can't connect PCLink to the remaining connection). Wondered if I'm screwing up something simple. Like not having the RS232 lines terminated, or as I suspect, that there is something more critically wrong with my configuration. I've configured Race Studio for Link CAN_Bus_Base_LLC I've configured PCLink to CAN 1 User Defined, 1mbib/s, OBD off. Transmit Generic Dash, 20hz, CAN ID 1000. Normal. Race Studio doesn't show the link on CAN_Bus Info. (does show both the dash and Evo 4) Cheers, Daniel.