Search the Community
Showing results for tags 'iacv'.
Found 2 results
I have a Supralink with a Ford IACV 2-wire installed. Trying to get the idle dialed in. Has anyone done this or have any settings available?. Basically i have switched 12v to Pin1 and Aux6 wired to Pin2. ISC Solenoid assigned. Unsure of the rest of the specs and frequency. Just seeing if anyone has made this happen and if so this would be great info for the next guy. So far car idle climbs from 1k to 3k RPM as engine warms up. Here are a few specs. Thanks in advance.
Hey guys, I have a v44 ecu I'm trying to to setup to suit a mitsubishi 4G93 engine, 1.8L (2000) i have setup most things as copied from evo 6 wiring diagrams (evo 6 stock ecu runs this engine with no wiring changes) i have hooked up pin 4, 17 (coil a) 5, 18 (coil b ) to aux 5, 6 7,8 respectively, assigned the outputs and as isc stepper, i get the stepper move when key on but it just opens fully and causes lean condition, when swapping wires around I can get it to fully close, but no combination will get it to work correctly, I have tried bi Polar and unipolar settings neither works as it should. Wondering If anyone has faced the same issue and knows how to fix it, cheers!