Search the Community
Showing results for tags 'no start trigger help trigger offset'.
Found 1 result
We have a 1992 bmw 525i (m50 non vanos motor) in the shop that we have built. We had the car running on the factory ecu before we began installing this one. We are using an e36 plug/play ecu to run our non vanos motor. All the pins have been moved around to the correct spot. Trigger 1 vr crankshaft Trigger 2 VR camshaft (we used the original m50nv camshaft sensor, it is a vr, the e36 is a hall effect) All 6 injectors tested ok All 6 coils tested ok Coolant temp ok IAT sensor ok Cranking RPM is 200 rpm in the link ecu Trigger 1 and Trigger 2 show NO error I have tried using 84, 276, -84, -276 as a trigger offset for trying to get this to fire up. I have had someback fires and "almost" starts. Need help on what settings to use for the trigger. Thanks. Please keep in mind this is obdI e34 m50 non vanos motor. The crankshaft pulley that is on the motor, is still an original one.