Search the Community
Showing results for tags 'starter'.
Found 1 result
First time poster here, Bit of background, I've installed a Link Thunder on my 2007 Subaru Liberty GT Spec B Manual with a built EJ255. I haven't cut the factory loom, instead made my own patch harness. I've had no trouble setting up the ecu, apart from the Start Position which I have assigned to DI10. I've got a problem where with the key OFF I have 3v on this wire, 7v with the key ON and 9v while cranking. I'll attach a link to a video which shows DI10 and Aux. 8 (Starter Solenoid) are flashing on and off rapidly with the key in the ON position. One I turn the key to start they both stay ON, release the key and they flash again. https://www.youtube.com/watch?v=UWuCVqM-828 I've plugged my OEM ecu back in and tested the voltage, 0v with the key OFF and ON, 10-11v while cranking, which I believe is correct. I've also attached a photo of the OEM wiring diagram for reference, I've connected pin C32 to DI10 (Start Position), the "On Level" set to HIGH. Then C20 to Aux. 8 (Starter Solenoid), the "Polarity" set to LOW. I'm trying to work out if I have a wiring problem or if I may of configured something wrong. I can provide any other details, any assistance would be great.