Search the Community
Showing results for tags 'timing'.
Found 2 results
Hello there, I am still working on my Carisma GDI Turbo. I was at the dyno again today, and well… My Lambda needed some correction ( I was nearly at 0.7 A/F Ratio during higher load). But even after correction, the engine is not performing verry well. Coud any of you look over my ignition Timing? The engine got 12:1 compression, 5psi of slight boost, and I got massive pover loss over 3500 rpm, the boost pressure is stable. Maybe my ignition timing is set to late…? I use IK22 sparkplugs with reduced gap (set to 0.5mm). These are quite cold plugs. Fuel corr. 1.2 20052019 16_10 Automatik.llg Fuel corr. 1.2 20052019 16_10 Automatik.pclr
Hi, I am a new user for the Link G4+ PnP Evo 6 ecu. I downloaded and updated to the new 5.4.3 firmware. I tried to do the ignition timing calibration but for some reason the lock ignition timing feature and the adjustments won't work. Example - I have the runtime values open and the engine is roughly idling 1200-1300 rpm (haven't adjusted the idle yet) and timing is 20-22. When I open the calibration window the timing drops to 0. Ok thats fine but when I change it to 10 - nothing happens. Also when trying to adjust the delay and timing correction - nothing happens. Using a Bosch timinglight with my friend. Any help?