Search the Community
Showing results for tags 'triggering'.
Found 1 result
Car wont start got triggering errors need advice as to why i have this problem engine is a 4efte Trigger1 is wired to NE Trigger 2 is wired to G1 G2 is not wired in to nothing. Shouldn't it be? G- is wired to sheilded ground on the monsoon i do not know if this is the correct way as this is the first time wiring up a ecu so anyone that has done this please point me where my mistake is. Engine has spark and fuel all that needs to be done is to set the trigger offset with a timing light and see if it will start but this wont solve triggering errors. Car runs stock distributor and batch injection. The 4e-fte has a 24/1 tooth inside Distributor. for triggering i have it set up as so: Triggermode:multi-tooth Trigger priority: Trigger 1 Trigger 1 type: reluctor Trigger 1 filtering: Level 1 (low) Multi-tooth position: crank tooth count:24 Trigger 2 type: reluctor Trigger 2 filtering: Level 1 (low) Sync Mode: Cam Pulse 1x For fuelling i have injection rate every 1 engine cycle should i make it 1/2?