Search the Community
Showing results for tags 'v10 srt'.
Found 1 result
Hello i have really strange issue on car which was running perfectly fine, i removed ecu from car, by disconnecting both connectors of loom, connect it back and car does not start. i see rpm signal is flactuating badly what i tried so far: 1) replaced crank sensor 4 times 2) checked gap between sensor and trigger wheel (0.8mm) 3) checked cam trigger signal 4) disconnected all sensors from car (map, pressure sensors) also including fuel pump relay 5) reloaded tune again and stored it 6) tried to play with rpm filtering and trigger filtering 7) turned off injectors 8) turned off ignition coils 9) changed wiring from trigger1 to ecu 10) checked 5v to trigger 1 sensor - all good and does not disappear when cranking 11) checked ground and checked signal wires also rewired but still same datalogged captured via trigger scope nothing helped so far... here are all kind of logs and screens please kindly see and suggest what im missing here... trigger-log.llg trigger-setupv2-trig2off.pclr Trigger Scope Log 2018-09-20 5;24;55-v2 pm.llg