T3rrorbyte Posted May 8, 2019 Report Share Posted May 8, 2019 Hey, As the title suggests i want to added pop's and bangs with over run but want to be able to switch it off when i want to. I have an Evo 8 and my tuner has used the inter cooler switch to setup standing anti lag and launch control and i have another switch for selecting 1.6 or 1.8 bar of boost is it possible to ad another switch for over run and how would that work with the two boost pressure settings? Thanks in advance Ben Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted May 9, 2019 Report Share Posted May 9, 2019 you could wire that 3rd switch to an extra DI and have an ignition and fuel trim based on the switch position and throttle/load/rpm to give you the desired effects. Quote Link to comment Share on other sites More sharing options...
T3rrorbyte Posted May 10, 2019 Author Report Share Posted May 10, 2019 Hi Brad, Thanks for the response, sounds relatively straightforward. im guessing DI is digital input? I will probably ask my tuner to do the install and config, what would take him an hour would take me way longer to do and still not have it right. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.