Hiromi Posted May 9, 2019 Report Share Posted May 9, 2019 Injection of SXE 10 (3S-GE) I am looking for setting information of [Injector Invalid Injection Time Table] and [Inj Short Pulse Width Addition Table]. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted May 9, 2019 Report Share Posted May 9, 2019 Not sure what the first value you are looking for is, but the short pulse width just leave zerod out. If the first value is latency or dead time, just use the values in the base cal. This is assuming you are running stock injectors. Quote Link to comment Share on other sites More sharing options...
Hiromi Posted May 9, 2019 Author Report Share Posted May 9, 2019 Thank you for answering. What I am looking for is the 340cc normal injector information. The initial data is traditional and there is no injector information. The base map of PCLink is different from the normal 340cc because it is a 1000cc injection. Also, there is no fuel pressure information. Please let me know if you know. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted May 10, 2019 Report Share Posted May 10, 2019 i ran the 340cc injectors in modelled fueling with zero ill effects. ran with the short pulse width zerod out and the standard latency values from the older firmware base cal. let me see if i can find that info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.