StijnFSP Posted May 20, 2019 Report Share Posted May 20, 2019 Hi i want to connect 3 wheelspeed sensors to the fury so what sensors can i use or how do i best set it up Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 22, 2019 Report Share Posted May 22, 2019 My suggestion would be about 12 teeth for a good balance between resolution and max speed. Hall or reluctor is fine, but hall is often easier to mount and can work down to lower speeds. Have a look at a ZF GS1005, a simple M12 threaded body. Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted May 23, 2019 Author Report Share Posted May 23, 2019 ok thnx because they mounted opel wheelspeed sensors now reluctor type any sugestion on wiring Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 24, 2019 Report Share Posted May 24, 2019 11 hours ago, StijnFSP said: any sugestion on wiring 1 wire to the DI, one wire to sensor ground. How many teeth do the target wheels have - if more than about 25 it is not going to work. Quote Link to comment Share on other sites More sharing options...
StijnFSP Posted May 24, 2019 Author Report Share Posted May 24, 2019 ok i will shave some off Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.