Jump to content

Wheelspeed sensors

Recommended Posts

My suggestion would be about 12 teeth for a good balance between resolution and max speed.  Hall or reluctor is fine, but hall is often easier to mount and can work down to lower speeds.  Have a look at a ZF GS1005, a simple M12 threaded body.

Share this post

Link to post
Share on other sites


11 hours ago, StijnFSP said:

any sugestion on wiring

1 wire to the DI, one wire to sensor ground.  How many teeth do the target wheels have - if more than about 25 it is not going to work.

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...