Jump to content
Sign in to follow this  
Ranbie

COP Conversion for B18C with HC96+

Recommended Posts

Morning,

I'm wanting to wire in a T1 Race Cam Trigger system for a B18C and completely remove the factory Distributor. Can the ignition coils be run straight from the ECU ignition pins or do they have to be routed through a CDI box.

 

Cheers, 

Share this post


Link to post
Share on other sites

depending on the coils you use you can either fire them direct from the ECU or you may need an external igniter. The coils from the more modern k20's fit onto B16/18's pretty well and dont require any igniters as an example.

Share this post


Link to post
Share on other sites
On 5/21/2019 at 3:59 PM, cj said:

depending on the coils you use you can either fire them direct from the ECU or you may need an external igniter. The coils from the more modern k20's fit onto B16/18's pretty well and dont require any igniters as an example.

Thanks for confirming that! I will be running K20 coils with in-built igniters.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...