theFiztec Posted May 22, 2019 Report Share Posted May 22, 2019 Hi all, Im just wondering what are the Calibration table that i should use for the AC Evap temp sensor. Mine does have variable resistance in series with the evap temp sensor from the factory configuration to allow AC temp control. i tried using bosch std calibration in the PC Link but i found out it was not too accurate as, my AC keep on engage and disengage too frequently even i set the controller at the highest temperature setting. Just for info my car using Denso 077500-0710 thermistor for AC Evap Temp Sensor. thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 23, 2019 Report Share Posted May 23, 2019 If you check the resistance in ice water and again in boiling water and post those here I will tell you if it matches any of the built-in calibrations. Quote Link to comment Share on other sites More sharing options...
ericsiewkk Posted May 28, 2019 Report Share Posted May 28, 2019 of a daihatsu yrv Quote Link to comment Share on other sites More sharing options...
theFiztec Posted May 31, 2019 Author Report Share Posted May 31, 2019 On 5/28/2019 at 10:27 PM, ericsiewkk said: of a daihatsu yrv Thanks! Will give it a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.