Jump to content
AEWON

Plug in Link, case modifications for xs loom etc

Recommended Posts

Hey all, so i’m running a plug in link G4+ S13, have 2 Xs looms and 2 canbus adapter looms, internal map sensor hose, tuning cable and 2 e-throttle wires to route, so it’s pretty busy, how’s everyone routing all these cables? through the aluminium side case or out of the steel lid? anyone have pics of a tidy installation? 

Share this post


Link to post
Share on other sites

Hi,

Nothing special about mine (and not as many accessories) but I came across your post and since I've been logging today figured I'd send some pics.

I bought a gc8 wrx with a link G4+ installed. The harness, USB tune cable and XS loom come out the side of the casing through a grommet.

When I removed the ECU cover, I could see the original hole for the harness has been enlarged with some snips and the grommet has been swapped for a bigger one. It's all neat enough though as the ECU box is covered by a metal protection cover and then the carpet.

At the moment if not connected to the laptop I just coil the USB cable and tuck it under the edge of the carpet.

I'm waiting on a new OBD adapter but I'll probably just connect it to the XS cable and sit it under the stereo.

20190601_221822.jpg

20190601_221936.jpg

20190601_222127.jpg

20190601_222813.jpg

20190601_222845.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...