Jump to content
efi265

logging Knock ?

Recommended Posts

hi guys i have had my knock sensor fitted and tuned .but would like to log knock data but am not sure how this works if its turned on will the knock control timing etc obviously..my tuner said there is not enough inputs for the ecu to work if there is inbuilt knock control why would this be do you think .i have a red g4 extreme. i have added knock system to logging parameter list is this the correct thing to do

cheers Ross

e85 efr turbo knock added.pcl

Share this post


Link to post
Share on other sites

Im not too sure of your question or what your tuner is on about.  The G4 ecu logging is a bit limited in that is records a fixed set of channels which doesnt include the individual cylinder knock levels.  It does log knock threshold and global knock level however.  If you want more detail you can PC log to get all parameters.  

Has this map actually been loaded into an ECU?  It doesnt look like the knock control is set up correctly, possibly because this hasnt been in a live ECU?   Knock control needs to be set to "internal".  Knock ign trim cyl 1 table needs to be zeroed out (might do this automatically when you load into an ECU)?  Knock target table needs to be set up.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...