Jump to content

EJ20G knock setup


subiseidl

Recommended Posts

I've been learning a lot about tuning from the hp academy courses and was gonna setup the knock control on my car when I noticed that the OEM knock signal isn't listed in the ecu pinout. Do I need to wire in a knock sensor to one of the digital inputs on the expansion loom. Thanks

Link to comment
Share on other sites

24 minutes ago, subiseidl said:

I was thinking that but for the version 1-2 it doesn't appear to be the case.

Provided it is actually a G4+ WRXV1-2 ecu that you have then I can assure you it is.  It is not listed in the pinout because it is not a user configurable input or output, it is dedicated to knock only.

Link to comment
Share on other sites

now I think I'm getting it figured out. So i set the frequency to 13Khz and a gain of 7. I've been running this map without knock control for a year on E85. I'm still learning alot so any feedback is much appreciated. Also the reason I didn't think it was working before was because with a gain of 1 it wasn't picking up anything. 

So do I need to setup the individual cylinder gains for #3 and #4 cylinder to bring them more inline with the rest.

image.thumb.png.e8524016685f1d5d8fc90c6c787caa03.png

Link to comment
Share on other sites

so with a gain of 5, cylinders 1 and 3 set to .7, and cylinder 2 set to 1.3. I also installed a brand new knock sensor. I did a 5th gear pull. I'm on e85 and I know that the oem slanty intercooler is inadequate. Here's the results so far.

image.thumb.png.9b2a61ed6b5484711750714fef807158.png

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...