Jump to content
cj.surr

Stacking Virtual Aux

Recommended Posts

I have been reading that Virtual Aux can be stacked to gain additional conditions. I am planning to have multiple levels of engine safety and I believe I will need to stack multiple Virtual Aux. However, when I am going through the available switch conditions, I only see Virtual Aux 1 as an option. I believe I will need at least one more Virtual Aux to be selectable as a switch condition. Am I missing something here or is only the first Virtual Aux meant to be stacked? 

 

image.thumb.png.ba88ec9db50ad16256f16ba96fa4bb93.png

Thanks

CJ

Share this post


Link to post
Share on other sites

Also a comment... I am configuring a turbo speed sensor for a Borg warner EFR. 

 

Per the manual - 

image.png.c9914365640732dcc0567df8c44ad56a.png

 

The divider for the EFR sensor is 8 

That gives me 6000 * 14 Teeth / 8 = 10,500

PCLink is telling me the max value is 10,000. The limit close enough for my sensor, but doesn't make a lot of sense.

Share this post


Link to post
Share on other sites

I'm seeing now why that limit is there... 500hz max frequency. 

Is there an internal fuse for the +5v supply? I just got my unit in and I don't like how the +5v wire is split to go to different sensors right near the ECU connector. Unless there is an internal fuse, then that would be alright. 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...