Jump to content
Edmand Hon

Trigger error count appear when at 7200RPM on RB26 with AEM trigger disc

Recommended Posts

Hi,

 

      what will be the main root cause of Trigger error count appear when at 7200RPM on RB26 with AEM trigger disc? is it my Cam angle sensor give way?

Share this post


Link to post
Share on other sites

Can you trigger scope around that area? 
What does your trigger setup page look like? 
I have used a few of these discs on RBs without problems. Could be the optical sensor is getting weak.

 

Share this post


Link to post
Share on other sites

Start with a trigger scope capture at moderate RPM, it may give some clues.  A common theme I see on RB's is ground problems creating noise on the trigger inputs.  Here is a related article:  https://www.hpacademy.com/technical-articles/staying-grounded/

An economical fix for the RB trigger is often the NZ Wiring kit:  https://www.nzwiring.com/index.php/product/trigger-kit/  Many tuners over here if they have a RB that is giving trigger issues they just fit one of these kits as it usually works out cheaper than spending a couple of days trying to diagnose the factory system.  Even though it is still a cam mounted trigger it eliminates a most of the fundamental issues with the stock CAS:

  1. It is brand new so eliminates the 30 year old optical sensor. 
  2. It is reluctor so its voltage output increases with RPM, this means the signal to noise ratio is much better than the optical and arming threshold will take care of most electrical noise.
  3. It bolts directly to the cam sprocket eliminating the back lash that the factory spline drive system has.
  4. It does not connect the sensor ground to the body/engine ground like the stock sensor does which often gets around the GTR ground problems.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...