Jump to content
AEWON

Motec dash race harness and G4+ canbus

Recommended Posts

Hi there, please see attached wiring schematic, I’m in the middle of wiring up a  canbus loom from a G4+ plugin S13 ecu which i believe has an inbuilt resistor for canbus, then next I have a Link can lambda  and then last in the chain a Motec C125, am I correct in that I should  use Can 2 output on the G4+ as i’ll be connecting the dash to the motec “ecu” connector which is also labeled as Can 2 and also a spliced in resistor? 

Cheers 

754CD560-CF03-40C1-B33E-89F8DFD74285.jpeg

Share this post


Link to post
Share on other sites

You can use either CAN 1 or 2 at the Link end.  You can also use either CAN 1 or 2 at the Motec end but their normal convention is to use CAN 2 for the ECU.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...