Jump to content

LINK MONSOON ECU WITH HALTECH IQ3 DASH


sharvin 1174

Recommended Posts

Hi

I have been trying to connect my haltech iq3 dash to a link monsoon ecu through CAN communication but to no avail. When wiring the 34 pin connector from the IQ3 to the ecu connector,the ecu does not detect the dash in the can set up. Any advice? 

Thanks

Sharvin

Link to comment
Share on other sites

The "find devices" tool is only to find Link CAN lambdas, it wont find any 3rd party devices.

You will need to set up the ECU as per the IQ3 instructions in the help file and in the dash software you will also need to change the ECU type to Link and then do the "Read Vnet config" process.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...