Ashholmes Posted June 27, 2019 Report Share Posted June 27, 2019 Very new to all this. Had fault codes 17 and 49 come up. Cleared them, started the car and blipped the throttle and didn't come back. Any ideas if they come back the problem? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted June 27, 2019 Report Share Posted June 27, 2019 17 is an volt 3 at ground and 49 is AN temp 3 at 5V it will depend on what is assigned to these inputs. Quote Link to comment Share on other sites More sharing options...
Ashholmes Posted June 28, 2019 Author Report Share Posted June 28, 2019 How do I find out what's assigned to the inputs? And what does AN stand for? Thanks for the reply! Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted June 28, 2019 Report Share Posted June 28, 2019 AN stands for analog. They are assigned in ecu settings. What ecu /vehicle/engine are you using? If you want to post the map here someone will take a look. Also, do the faults come back when you clear them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.