Jump to content
Saiful Azman

G4+ plugins subaru WRXlink (7-9) CEL indicator missing

Recommended Posts

Hi to all. Still new regarding the ecu links plugins. My problem is, i been use this ecu about 4 to 5 month ago. Everyday when i start up the car always looking for the CEL indicator. But today there is no CEL indicator and i have check all the fuse and relay in a good condition. And also my car can startup like normal car. The im using my laptop to test the CEL , i try to disconnect the tps sensor. The code are been trace by the laptop but no CEL light in the dash cluster. Please help anything wrong here?

Share this post


Link to post
Share on other sites

In PC Link, select ECU settings and then expand auxilliary outputs, click on Aux 5, then double click on function and in the new box that pops up choose Test (On) and then ok .  The check engine light should come on.

Change back to CEL afterwards, or don't store and it will revert back to CEL on the next power cycle.

image.thumb.png.71f3d28035def65bd113e5db68da930e.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...