victory Posted July 3, 2019 Report Share Posted July 3, 2019 Dose any one has an information on LS GM paddle wiring on thunder Quote Link to comment Share on other sites More sharing options...
cj Posted July 4, 2019 Report Share Posted July 4, 2019 What model & year is your pedal from? Here is some generic GM ethrottle pedal info. Maybe one of the pinouts looks like your pedal http://chevythunder.com/drive_by_wire.htm run the link, run 5v to the 2x 5v ref pins, sensor ground to the 2x ground pins, and then 2x free ANVolt inputs to the 2x APP sginal pins. If you have a pedal with 3x outputs, just ignore the 3rd one. Quote Link to comment Share on other sites More sharing options...
victory Posted July 7, 2019 Author Report Share Posted July 7, 2019 Thanks for your support, i am having 6pin pedal for camaro, the throttle working fine the padel also reading but still it is not wroking ethrottle test1.pclr Log 2019-07-7 8;18;13 pm.llg Quote Link to comment Share on other sites More sharing options...
cj Posted July 7, 2019 Report Share Posted July 7, 2019 It looks like you havent run calibration on either the pedal or the TPS Or go to the ecu controls -> TPS setup menu. the voltages your APS is showing look believable, its just not calibrated right. TPS might be wired ok, but its very hard to tell when the APS calibration is clearly wrong Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.