ztoy Posted July 16, 2019 Report Share Posted July 16, 2019 Im trying to find some information in regards to the #G4RET Throttle controller. I currently run ETC through an extreme black ecu. Works very well but im trying to free up some extra inputs and outputs. I cannot find any installation and operation guides online or in the help files. What im wanting to know is. 1. How many wires for installation between the ecu and the #G4RET 2. Any programability in the unit for throttle sensitivity and Idle controll. Any info and experience that you guys can provide is appreciated. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 16, 2019 Report Share Posted July 16, 2019 It would use up the same amount of I/O as doing it internally. The ECU still has to have the 4 volt inputs and the 3 Aux channels in use for it to operate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.