Jump to content
434josh

Boost Control

Recommended Posts

So I have my open loop control pretty much sport on but the closed loop isn't quite there. I am unsure what needs to be altered. I have it where it doesn't overshoot but it does hit target and oscillate nearly 20 kpa.

Any suggestions?

 

https://www.dropbox.com/s/55qq89yp0esygd7/6.1%20pass.llg?dl=0

https://www.dropbox.com/s/bui52a6m6188gjy/Ford%20363plus%20ve%20smooth.pclr?dl=0

 

Share this post


Link to post
Share on other sites

I would suggest to start with, change the target table so that the rows are flat right across the RPM range like pic below, PID is easier to tune initially if the target is stable.  

Also, I would half the proportional and derivative numbers that you currently have and give it a bit more stage 3 delay, maybe 0.5s.  Do us another log with those changes and hopefully it will be clearer what we need to change.

RMcrkIF.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...