Jump to content
BlackBeautyGermany

Group staged injection and AUX help needed

Recommended Posts

Hello from Germany,

i have a question to the group staged injection.

The 4 700cc primary injectors are in the cylinder head and the 4 375cc secondary inejctors are before te throttle bodys.

How should i connect the injectors to the ECU? I use the G4+ Storm with 4 Injector channels.

 

The second thing is a problem with the AUX.

I have isntalled a electrical throttle body to my supercharcher to reduce the air at startup and idl.

How should i connect the throttle body to the ECU?

The mass or 5V+ signal must be shwitched on at startup and up to 1200rpm.

How is this possible?

 

I hope you have an idea for me?

 

Greetings from germany

Share this post


Link to post
Share on other sites

In Group staged injection mode, odd numbered drives work as primary and even numbered drives are secondary.  So two primary injectors should be wired to Inj drive 1, two pri injectors to Inj drive 3.  Secondaries to inj drives 2 & 4.

Im not sure I understand your question about the throttle, but the Storm cant control electronic throttle directly.

Share this post


Link to post
Share on other sites

OK thanks for the information to the injector drives. I will do it

 

To the throttle body.

I only need a permanent mass or 5V+ signal for this setup.

The permanent signal must be switched on up to 1200rpm.

How can i control this in the Link?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...