briansfd Posted July 20, 2019 Report Share Posted July 20, 2019 Hi All, The wiring diagram that comes with the CAN lambda sensor shows two versions of wiring, both with external power and ground for the 4 way connector. I'm just looking to confirm that there is no problem with using the power and ground from the PCB via the CAN to PCB connector (part# canpcb). Thanks! Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 20, 2019 Report Share Posted July 20, 2019 I would use an external power and ground to mitigate over current issues. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted July 20, 2019 Report Share Posted July 20, 2019 No, unfortunately you can't power a can lambda from a plug in pcb (although this has been requested for the future) You will need to follow the instructions, the power needs to come from a nice clean supply, away from inductive loads. HTH, Richard. Quote Link to comment Share on other sites More sharing options...
briansfd Posted July 20, 2019 Author Report Share Posted July 20, 2019 Thanks guys! Glad I asked! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.