Jump to content
Sign in to follow this  
briansfd

CAN Lambda - power ground

Recommended Posts

Hi All, 

The wiring diagram that comes with the CAN lambda sensor shows two versions of wiring, both with external power and ground for the 4 way connector. I'm just looking to confirm that there is no problem with using the power and ground from the PCB via the CAN to PCB connector (part# canpcb).

Thanks!

Share this post


Link to post
Share on other sites

No, unfortunately you can't power a can lambda from a plug in pcb (although this has been requested for the future) 

You will need to follow the instructions, the power needs to come from a nice clean supply, away from inductive loads. 

HTH, 

Richard. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...