Burklet89 Posted July 29, 2019 Report Share Posted July 29, 2019 Hi, I've added a Gearbox temp sensor that is wired into AN TEMP 3, I can see that the sensor works correctly when connected to my laptop, but I'm having a bit of trouble getting it to to display on my racepack iq3 . I have also tried going into the link CAN set up to add the Gearbox temp sensor as a parameter to be streamed, but I still can get it to display. Everything else is working on the iq3 display. Any insight into how I could get it to display this new temp sensor would be great? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 30, 2019 Report Share Posted July 30, 2019 It is not easy at the racepak end as they arent very configurable. We can possibly repurpose one of the channels you are not using. If you attach your ecu and dash config I should be able to have a go when I get a minute. Simon 1 Quote Link to comment Share on other sites More sharing options...
Burklet89 Posted July 30, 2019 Author Report Share Posted July 30, 2019 Thanks mate, I was trying to repurpose the existing EFI oil temp as this isn't being used but i haven't had any luck getting it to work. i should of just bought the link dash R31.pclr r31.rcg Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 31, 2019 Report Share Posted July 31, 2019 Try these: r31 New CAN.rcg R31 New CAN.pclr Simon 1 Quote Link to comment Share on other sites More sharing options...
Burklet89 Posted August 1, 2019 Author Report Share Posted August 1, 2019 That worked a treat thanks mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.