PounceBounce Posted August 3, 2019 Report Share Posted August 3, 2019 Hey there, Doing some upgrades this weekend from all the factory sensors to link sensors. What I've seen in the manual is a little vague. Is it fine to use the existing wiring for the factory IAT and MAP and just wire the new Link plugs on? Furthermore, I'll be using some extra sensors not available from factory. Im assuming multiple sensors can be hooked up to the sensor ground without interference? Couldn't find clarification on this as I assume it's simple considering there is only one from the expansion looms. E.g. EGT, Fuel Pressure, EMAP? Cheers. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 3, 2019 Report Share Posted August 3, 2019 4 hours ago, PounceBounce said: Doing some upgrades this weekend from all the factory sensors to link sensors. What I've seen in the manual is a little vague. Is it fine to use the existing wiring for the factory IAT and MAP and just wire the new Link plugs on? Yes. 4 hours ago, PounceBounce said: Furthermore, I'll be using some extra sensors not available from factory. Im assuming multiple sensors can be hooked up to the sensor ground without interference? Yes, splice the sensor ground out to as many sensors as you like. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.