Jump to content
PounceBounce

RX7 S8 Map and IAT sensors

Recommended Posts

Hey there, 

 

Doing some upgrades this weekend from all the factory sensors to link sensors. What I've seen in the manual is a little vague. Is it fine to use the existing wiring for the factory IAT and MAP and just wire the new Link plugs on? 

 

Furthermore, I'll be using some extra sensors not available from factory. Im assuming multiple sensors can be hooked up to the sensor ground without interference?  Couldn't find clarification on this as I assume it's simple considering there is only one from the expansion looms.

E.g. EGT, Fuel Pressure, EMAP? 

 

Cheers. 

Share this post


Link to post
Share on other sites
4 hours ago, PounceBounce said:

Doing some upgrades this weekend from all the factory sensors to link sensors. What I've seen in the manual is a little vague. Is it fine to use the existing wiring for the factory IAT and MAP and just wire the new Link plugs on? 

Yes.

 

4 hours ago, PounceBounce said:

Furthermore, I'll be using some extra sensors not available from factory. Im assuming multiple sensors can be hooked up to the sensor ground without interference? 

Yes, splice the sensor ground out to as many sensors as you like.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...